Grass Valley Concerto Routing Matrix v.1.8.1 - Manual (Page 124)

124 Concerto — Installation and Service Manual
Section 3 — Control System Configuration
Figure 71. AES Input Attributes
Use this dialog to assign Attribute and Invert options individually, in
groups, or by using the “all” buttons.
Asynchronous Input (or output) is not
supported by Concerto.
Attributes affect the way signals are routed through a matrix. Table 45
defines how each setting affects the signals.
Table 45. AES Input Attribute Options
Attribute Definition 100 Hz (Right) 1000 Hz (Left)
0 Normal Defaults are assigned to all Inputs. 100 Hz 1000 Hz
1 Right Only Right Channel Audio will be routed to the assigned Input. 100 Hz 100 Hz
2 Left Only Left Channel Audio will be routed to the assigned Input. 1000 Hz 1000 Hz
3 Sum Frequencies of the Right and left Channel are added together. 1000 Hz +100 Hz 1000 Hz +100 Hz
4 Swap Left and Right Channels are swapped. 1000 Hz 100 Hz
5 Bypass Not supported by Concerto configurations.
6 Async Available only for 7500 matrices.
7 Mute AES silent output. Available only for Concerto.
CH1 CH1
CH2 CH2
Normal
Left Channel
Right Channel
CH1
CH2
Left Only
Right
Left CH1
CH2 Left
CH1
CH2
Right Only
Right Left CH1
CH2 Right
CH1
CH2 CH2
CH1
Swap
Right
Right Left
Left
CH1
CH2
Sum
Right
Left CH1
CH2
Left & Right
Left & Right
7103_01_01_
r0