Grass Valley Concerto Routing Matrix v.1.8.1 - Manual (Page 115)

Concerto — Installation and Service Manual 115
Concerto Web Pages
ured on the same network. Various web pages are displayed by clicking on
the names of the pages on the left side of the screen.
The Concerto Controller must be reset before most changes will take effect.
This is accomplished by checking the
Do Reset box and then clicking on the
Save New Settings button at the bottom of the screen.
The Concerto Matrix Description ( Figure 58 on page 112 ) and Concerto Matrix
Network Configuration pages ( Figure 59 on page 113 ) are illustrated earlier in
this document. The following Concerto web pages are also available:
Matrix Controller System Configuration
The Matrix Controller System Configuration web page allows you to enter
descriptive information for the Concerto device, adjust serial port settings,
and select control options.
Figure 61. Matrix Controller System Configuration Web Page
System Parameters
The screen section allows descriptive information for the Concerto device,
including name, asset tag, and location.
Serial Port Configuration
Control settings for the console and external serial ports are available in this
screen section.