H3C Technologies H3C S5830V2 Series Switches - Manual (Page 79)

68
Configuring the GR restarter
Step Command Remarks
1. Enter system view. system-view N/A
2. Enable FSPF GR. fspf graceful-restart By default, FSPF GR is disabled.
3. Configure the maximum FSPF
GR interval. fspf graceful-restart interval
interval-value
The default setting is 120 seconds.
Configuring the GR helper
Step Command Remarks
1. Enter system view. system-view N/A
2. Configure the device to act as
an FSPF GR helper.
fspf graceful-restart helper
By default, a device acts as an FSPF
GR helper.
Displaying and maintaining FC routing and
forwarding
Execute display commands in any view and reset commands in user view.
Task Command
Display FC routing table information.
display fc routing-table [ vsan vsan-id ] [ statistics |
verbose ]
display fc routing-table vsan vsan-id fc-id [ mask |
mask-length ] [ verbose ]
Display FC FIB table information. display fc fib [ fcid [ mask-length ] ] vsan vsan-id
Display FC Exchange table information.
display fc exchange { link | protocol } [ slot slot-number ]
display fc exchange link verbose [ slot slot-number [ exid
exid ] ]
Display FSPF neighbor information. display fspf neighbor [ vsan vsan-id ]
Display link state database information. display fspf lsdb [ vsan vsan-id ]
Display FSPF GR state information. display fspf graceful-restart [ vsan vsan-id ]
Display FSPF statistics. display fspf statistics [ vsan vsan-id ]
Clear FSPF statistics. reset fspf counters [ vsan vsan-id ]