H3C Technologies H3C S5830V2 Series Switches - Manual (Page 66)

55
Priority: 128
No interfaces available.
The output shows that the domain configuration is complete and that the runtime domain ID of Switch A
is 1.
# Verify the configuration on Switch B.
[SwitchB-vsan1] display fc domain vsan 1
Domain Information of VSAN 1:
Running time information:
State: Stable
Switch WWN: 48:33:43:2d:46:43:1B:1B
Fabric name: 11:11:11:11:11:11:11:11
Priority: 128
Domain ID: 2
Configuration information:
Domain configure: Disabled
Domain auto-reconfigure: Disabled
Fabric name: 11:11:11:11:11:11:11:11
Priority: 128
Domain ID: 2 (static)
Principal switch running time information:
Priority: 128
No interfaces available.
The output shows that the domain configuration is complete and that the runtime domain ID of Switch B
is 2.
Dynamic fabric building configuration example
Network requirements
As shown in Figure 23 , use the dynamic method to build a fabric.
Figure 23 Network diagram
Configuration procedure
This section describes only the fabric building configurations.