H3C Technologies H3C S5830V2 Series Switches - Manual (Page 108)

97
Triggering a complete distribution
Use the zoneset distribute command to trigger a one-time complete distribution, which distributes both
the active zone set and zone database.
After activating a zone set as the active zone set by using the zoneset activate command, you can modify
the zone database configuration. With the zoneset distribute command, you can distribute the active
zone set and the modified zone database to the entire fabric without changing the active zone set.
To trigger a complete distribution:
Step Command
1. Enter system view. system-view
2. Enter VSAN view. vsan vsan-id
3. Trigger a complete distribution. zoneset distribute
Renaming zone aliases, zones, and zone sets
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter VSAN view. vsan vsan-id N/A
3. Rename a zone alias.
zone-alias rename old-name
new-name
The zone alias to be renamed must
have been created, and the new
zone alias must not have been
created.
4. Rename a zone. zone rename old-name new-name
The zone to be renamed must have
been created, and the new zone
must not have been created.
5. Rename a zone set. zoneset rename old-name new-name
The zone set to be renamed must
have been created, and the new
zone set must not have been
created.
Copying zone aliases, zones, and zone sets
You can create a zone alias, zone, or zone set by copying an existing one. The source and the
destination have the same contents but different names.
To copy a zone alias, zone, and zone set:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter VSAN view. vsan vsan-id N/A