H3C Technologies H3C S5830V2 Series Switches - Manual (Page 58)

47
Configuring the fabric timers
The fabric operation involves the following timers:
• Distributed service timeout period.
• Error detection timeout period.
• Resource allocation timeout period.
For more information about these timers, see FC-related protocols and standards.
You can configure fabric timers in one of the following views:
• System view—The configuration takes effect on all VSANs.
• VSAN view—The configuration takes effect on only the VSAN.
If you configure a fabric timer in both system view and VSAN view, the configuration in VSAN view
applies to the VSAN.
Configuring the fabric timers in system view
Step Command Remarks
1. Enter system view. system-view N/A
2. Configure the global
distributed service timeout
period. fc timer distributed-services value
The default setting is 5000
milliseconds.
3. Configure the global error
detection timeout period.
fc timer error-detect value
The default setting is 2000
milliseconds.
4. Configure the global
resource allocation timeout
period. fc timer resource-allocation value
The default setting is 10000
milliseconds.
Configuring the fabric timers in VSAN view
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter VSAN view. vsan vsan-id N/A
3. Configure the distributed
service timeout period for
the VSAN. timer distributed-services value
The default setting is 5000
milliseconds.
4. Configure the error
detection timeout period
for the VSAN. timer error-detect value
The default setting is 2000
milliseconds.
5. Configure the resource
allocation timeout period
for the VSAN. timer resource-allocation value
The default setting is 10000
milliseconds.