H3C Technologies H3C S6300 Series Switches - Manual (Page 90)

77
Timestamp
parameters
Description Example
iso
Timestamp format stipulated in ISO 8601.
Only logs that are sent to a log host support
this parameter.
<189>2003-05-30T06:42:44
Sysname %%10FTPD/5/FTPD_LOGIN(l):
User ftp (192.168.1.23) has logged in
successfully.
2003-05-30T06:42:44 is a timestamp in
the iso format.
none
No timestamp is included.
All logs support this parameter.
% Sysname FTPD/5/FTPD_LOGIN: User
ftp (192.168.1.23) has logged in
successfully.
No timestamp is included.
no-year-date
Current date and time without year
information, in the format of MMM DD
hh:mm:ss:xxx.
Only logs that are sent to a log host support
this parameter.
<189>May 30 06:44:22
Sysname %%10FTPD/5/FTPD_LOGIN(l):
User ftp (192.168.1.23) has logged in
successfully.
May 30 06:44:22 is a timestamp in the
no-year-date format.
FIPS compliance
The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for features,
commands, and parameters might differ in FIPS mode and non-FIPS mode. For more information about
FIPS mode, see Security Configuration Guide.
Information center configuration task list
Task at a glance
Perform at least one of the following tasks:
• Outputting logs to the console
• Outputting logs to the monitor terminal
• Outputting logs to a log host
• Outputting logs to the log buffer
• Saving logs to the log file
(Optional.) Managing security logs
(Optional.) Saving diagnostic logs to the diagnostic log file
(Optional.) Configuring the maximum size of the trace log file
(Optional.) Enabling synchronous information output
(Optional.) Enabling duplicate log suppression
(Optional.) Disabling an interface from generating link up or link down logs