H3C Technologies H3C S6300 Series Switches - Manual (Page 254)

241
Example for changing the value of a parameter
Network requirements
Change the log buffer size for the Syslog module to 512.
Configuration procedure
# Enter XML view.
xml
# Exchange capabilities.
urn:ietf:params:netconf:base:1.0
# Change the log buffer size for the Syslog module to 512.
xmlns:web="urn:ietf:params:xml:ns:netconf:base:1.0">
512
Verifying the configuration
If the client receives the following text, the edit-config operation is successful:
Saving, rolling back, and loading the configuration
Use NETCONF to save, roll back, or load the configuration.