Example for saving the configuration, Network requirements, Configuration procedure – H3C Technologies H3C S6300 Series Switches User Manual
Page 256: Verifying the configuration
243
•
Configurations that already exist in the current configuration are replaced by those loaded from the
configuration file.
# Copy the following text to the client to load a configuration file for the device:
The name of the specified configuration file must start with the storage media name and end with the
extension .cfg. The total length of the save path and file name must be no more than 191 characters.
After receiving the load request, the device returns a response in the following format if the load
operation is successful:
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
Example for saving the configuration
Network requirements
Save the current configuration to the configuration file my_config.cfg.
Configuration procedure
# Enter XML view.
# Exchange capabilities.
urn:ietf:params:netconf:base:1.0
# Save the configuration of the device to the configuration file my_config.cfg.
Verifying the configuration
If the client receives the following response, the save operation is successful: