Displaying and maintaining cwmp, Cwmp configuration example, Network requirements – H3C Technologies H3C S6300 Series Switches User Manual
Page 227
214
HTTPS connection establishment. For more information about configuring SSL client policies, see
Security Configuration Guide.
To specify an SSL client policy for the CPE to establish an HTTPS connection to the ACS:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter CWMP view.
cwmp
N/A
3.
Specify an SSL client policy.
ssl client-policy policy-name
By default, no SSL client policy is
specified.
Displaying and maintaining CWMP
Execute display commands in any view.
Task Command
Display CWMP configuration.
display cwmp configuration
Display the current status of CWMP.
display cwmp status
CWMP configuration example
Network requirements
As shown in
, use H3C IMC BIMS as the ACS to bulk-configure the devices (CPEs), and assign
ACS attributes to the CPEs from the DHCP server.
The configuration files for the devices in equipment rooms A and B are configure1.cfg and configure2.cfg,
respectively.