User-defined variables – H3C Technologies H3C S6300 Series Switches User Manual
Page 210
197
•
Event-specific variable—Available only for a type of event.
shows all system-defined variables.
Table 20 System-defined EAA environment variables by event type
Variable name
Description
Any event:
_event_id Event
ID.
_event_type Event
type.
_event_type_string
Event type description.
_event_time
Time when the event occurs.
_event_severity
Severity level of an event.
CLI:
_cmd
Commands that are matched.
Syslog:
_syslog_pattern
Log message content.
Hotplug:
_slot
ID of the IRF member device where a hot swap event occurs.
Interface:
_ifname Interface
name.
SNMP:
_oid
OID of the MIB variable where an SNMP operation is performed.
_oid_value
Value of the MIB variable.
SNMP_Notification:
_oid
OID that is included in the SNMP notification.
Process:
_process_name Process
name.
User-defined variables
You can use user-defined variables for all types of events.
User-defined variable names can contain digits, characters, and the underscore sign (_), but their
leading character cannot be the underscore sign.
Configuring a user-defined EAA environment
variable
Configure a user-defined EAA environment variable before you use it in an action.
To configure a user-defined EAA environment variable: