H3C Technologies H3C S6300 Series Switches User Manual
Page 230
217
c.
On the Add Device Group page, enter a service group name (for example, DB_1), and then
click OK.
Figure 6 Adding a device group
d.
Select Service > Resource > Device Class from the top navigation bar.
e.
Click Add.
f.
On the Add Device Class page, enter a device class name for devices in equipment room A,
and then click OK.
In this example, the device class for devices in equipment room A is Device_A.
Figure 7 Adding a device class
g.
Repeat the previous two steps to create a device class for devices in equipment room B.
4.
Add the devices as CPEs:
a.
Select Service > BIMS > Add CPE from the top navigation bar.
b.
On the Add CPE page, enter or select basic settings for device A, and then click OK.
This manual is related to the following products: