H3C Technologies H3C S6300 Series Switches User Manual
Page 232
219
Figure 10 Configuring the system settings of the ACS
6.
Add configuration templates and software library entries for the two classes of devices:
a.
Select Service > BIMS > Configuration Management > Configuration Templates from the
navigation tree.
Figure 11 Configuring templates page
b.
On the Configuration Templates page, click Import….
c.
On the Import Configuration Template page, select configuration template settings for the
Device_A device class, add the Device_A class to the Applicable CPEs pane, and then click OK.
d.
Repeat the previous two steps to configure a configuration template for equipment room B's
device class.
This manual is related to the following products: