Verifying the configuration, Performing cli operations through netconf, Configuration procedure – H3C Technologies H3C S6300 Series Switches User Manual
Page 261
248
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"
xmlns:nc="http://www.h3c.com/netconf/base:1.0">
Verifying the configuration
If the client receives the following text, the operation is successful:
xmlns:nc="http://www.h3c.com/netconf/base:1.0" message-id="100">
Performing CLI operations through NETCONF
You can enclose command lines in XML messages to configure the device.
Configuration procedure
# Copy the following text to the client to execute the commands:
This manual is related to the following products: