H3C Technologies H3C S6300 Series Switches - Manual (Page 107)

94
Step Command Remarks
7. (Optional.) Configure a
remote engine ID.
snmp-agent remote { ip-address |
ipv6 ipv6-address } engineid
engineid
By default, no remote engine ID is
configured.
To send informs to an SNMPv3
NMS, you must configure the
SNMP engine ID of the NMS.
8. (Optional.) Create or update a
MIB view.
snmp-agent mib-view { excluded |
included } view-name oid-tree
[ mask mask-value ]
By default, the MIB view
ViewDefault is predefined. In this
view, all the MIB objects in the iso
subtree but the snmpUsmMIB,
snmpVacmMIB, and
snmpModules.18 subtrees are
accessible.
Each view-name oid-tree pair
represents a view record. If you
specify the same record with
different MIB sub-tree masks
multiple times, the most recent
configuration takes effect. Except
for the four sub-trees in the default
MIB view, you can create up to
16 unique MIB view records.
9. Create an SNMPv3 group.
• In non-FIPS mode:
snmp-agent group v3
group-name [ authentication |
privacy ] [ read-view
view-name ] [ write-view
view-name ] [ notify-view
view-name ] [ acl acl-number |
acl ipv6 ipv6-acl-number ] *
• In FIPS mode:
snmp-agent group v3
group-name { authentication |
privacy } [ read-view read-view ]
[ write-view write-view ]
[ notify-view notify-view ] [ acl
acl-number | acl ipv6
ipv6-acl-number ] *
By default, no SNMP group
exists.
10. (Optional.) Convert a plaintext
key to an encrypted key.
• In non-FIPS mode:
snmp-agent calculate-password
plain-password mode {md5 |
sha } { local-engineid |
specified-engineid engineid }
• In FIPS mode:
snmp-agent calculate-password
plain-password mode sha
{ local-engineid |
specified-engineid engineid }
N/A