H3C Technologies H3C S6300 Series Switches - Manual (Page 121)

108
Task Command
Display RMON private alarm
entries.
display rmon prialarm [ entry-number ]
Display RMON event entries. display rmon event [ entry-number ]
Display log information for
event entries.
display rmon eventlog [ entry-number ]
Ethernet statistics group configuration example
Network requirements
Create an RMON Ethernet statistics entry on the device in Figure 33 to gather cumulative traffic statistics
for Ten-GigabitEthernet 1/0/1.
Figure 33 Network diagram
Configuration procedure
# Create an RMON Ethernet statistics entry for Ten-GigabitEthernet 1/0/1.
system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] rmon statistics 1 owner user1
# Display statistics collected by the RMON agent for Ten-GigabitEthernet 1/0/1.
display rmon statistics ten-gigabitethernet 1/0/1
EtherStatsEntry 1 owned by user1 is VALID.
Interface : Ten-GigabitEthernet1/0/1
etherStatsOctets : 21657 , etherStatsPkts : 307
etherStatsBroadcastPkts : 56 , etherStatsMulticastPkts : 34
etherStatsUndersizePkts : 0 , etherStatsOversizePkts : 0
etherStatsFragments : 0 , etherStatsJabbers : 0
etherStatsCRCAlignErrors : 0 , etherStatsCollisions : 0
etherStatsDropEvents (insufficient resources): 0
Incoming packets by size:
64 : 235 , 65-127 : 67 , 128-255 : 4
256-511: 1 , 512-1023: 0 , 1024-1518: 0
# Get the traffic statistics from the NMS through SNMP. (Details not shown.)