beautypg.com

Enabling the nqa client, Configuring nqa operations on the nqa client, Nqa operation configuration task list – H3C Technologies H3C S6300 Series Switches User Manual

Page 129

background image

116

Step Command

Remarks

1.

Enter system view.

system-view

N/A

2.

Enable the NQA server.

nqa server enable

By default, the NQA server
is disabled.

3.

Configure a TCP or UDP
listening service.

TCP listening service:

nqa server tcp-connect ip-address
port-number
[ tos

tos ]

UDP listening service:

nqa server udp-echo ip-address
port-number
[ tos

tos ]

You can specify the ToS
value in the IP packet
header of NQA probe

packets. The default ToS

value is 0.

Enabling the NQA client

Step Command

Remarks

1.

Enter system view.

system-view

N/A

2.

Enable the NQA client.

nqa agent enable

By default, the NQA client is enabled.

Configuring NQA operations on the NQA client

NQA operation configuration task list

Tasks at a glance

(Required.)

Configure at least one of the NQA operations:

Configuring the ICMP echo operation

Configuring the DHCP operation

Configuring the DNS operation

Configuring the FTP operation

Configuring the HTTP operation

Configuring the UDP jitter operation

Configuring the SNMP operation

Configuring the TCP operation

Configuring the UDP echo operation

Configuring the voice operation

Configuring the DLSw operation

Configuring the path jitter operation

(Optional.)

Configuring optional parameters for the NQA operation

(Optional.)

Configuring the collaboration function

(Optional.)

Configuring threshold monitoring

(Optional.)

Configuring the NQA statistics collection function

(Optional.)

Configuring the saving of NQA history records