H3C Technologies H3C S6300 Series Switches - Manual (Page 250)

237
# Perform the get operation to verify that the current value of the parameter is the same as the value
specified through the edit-config operation. (Details not shown.)
All-module configuration data retrieval example
Network requirements
Retrieve configuration data for all modules.
Configuration procedure
# Enter XML view.
xml
# Exchange capabilities.
urn:ietf:params:netconf:base:1.0
# Retrieve configuration data for all modules.
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
Verifying the configuration
If the client receives the following text, the get-config operation is successful:
xmlns:web="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="101">
1307
1
1308
1