Configuring split horizon and poison reverse – H3C Technologies H3C S12500-X Series Switches User Manual

Page 58

[SwitchA] rip 1

[SwitchA-rip-1] network 1.0.0.0

[SwitchA-rip-1] version 2

[SwitchA-rip-1] undo summary

[SwitchA-rip-1] quit

# Configure Switch B.

system-view

[SwitchB] rip 1

[SwitchB-rip-1] network 1.0.0.0

[SwitchB-rip-1] version 2

[SwitchB-rip-1] undo summary

# Configure Switch C.

system-view

[SwitchB] rip 1

[SwitchC-rip-1] network 1.0.0.0

[SwitchC-rip-1] version 2

[SwitchC-rip-1] undo summary

# Configure Switch D.

system-view

[SwitchD] rip 1

[SwitchD-rip-1] network 1.0.0.0

[SwitchD-rip-1] version 2

[SwitchD-rip-1] undo summary

# Configure Switch E.

system-view

[SwitchE] rip 1

[SwitchE-rip-1] network 1.0.0.0

[SwitchE-rip-1] version 2

[SwitchE-rip-1] undo summary

# Display all active routes in the RIP database on Switch A.

[SwitchA] display rip 1 database

1.0.0.0/8, auto-summary

1.1.1.0/24, cost 0, nexthop 1.1.1.1, RIP-interface

1.1.2.0/24, cost 0, nexthop 1.1.2.1, RIP-interface

1.1.3.0/24, cost 1, nexthop 1.1.1.2

1.1.4.0/24, cost 1, nexthop 1.1.2.2

1.1.5.0/24, cost 2, nexthop 1.1.1.2

1.1.5.0/24, cost 2, nexthop 1.1.2.2

The output shows two RIP routes destined for network 1.1.5.0/24, with the next hops as Switch B

(1.1.1.2) and Switch C (1.1.2.2), and with the same cost of 2.

Configure an additional metric for a RIP interface:
# Configure an additional metric of 3 for RIP-enabled interface VLAN-interface 200 on Switch A.

[SwitchA] interface vlan-interface 200

[SwitchA-Vlan-interface200] rip metricin 3

# Display all active routes in the RIP database on Switch A.

[SwitchA-Vlan-interface200] display rip 1 database

This manual is related to the following products: