H3C Technologies H3C S12500-X Series Switches - Manual (Page 18)

4
21B
Route redistribution
Route redistribution enables routing protocols to learn routing information from each other. A dynamic
routing protocol can redistribute routes from other routing protocols, including direct and static routing.
For more information, see the respective chapters on those routing protocols in this configuration guide.
The RIB records redistribution relationships of routing protocols.
22B
Extension attribute redistribution
Extension attribute redistribution enables routing protocols to learn route extension attributes from each
other, including BGP extended community attributes, OSPF area IDs, route types, and router IDs.
The RIB records extended attributes of each routing protocol and redistribution relationships of different
routing protocol extended attributes.
23B
Configuring the maximum lifetime for routes and
labels in the RIB
Perform this task to prevent routes of a certain protocol from being aged out due to slow protocol
convergence resulting from a large number of route entries or long GR period.
The configuration takes effect at the next protocol or RIB process switchover.
To configure the maximum lifetime for routes and labels in the RIB (IPv4):
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter RIB view. rib N/A
3. Create a RIB IPv4 address
family and enter RIB IPv4
address family view. address-family ipv4
By default, no RIB IPv4
address family is created.
4. Configure the maximum
lifetime for IPv4 routes and
labels in the RIB.
protocol protocol lifetime seconds
By default, the maximum
lifetime for routes and labels
in the RIB is 480 seconds.
To configure the maximum route lifetime for routes and labels in the RIB (IPv6):
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter RIB view. rib N/A
3. Create a RIB IPv6 address
family and enter RIB IPv6
address family view.
address-family ipv6
By default, no RIB IPv6
address family is created.
4. Configure the maximum
lifetime for IPv6 routes and
labels in the RIB.
protocol protocol lifetime seconds
By default, the maximum
lifetime for routes and labels
in the RIB is 480 seconds.