H3C Technologies H3C S12500-X Series Switches User Manual

Page 306

292

Figure 73 Network diagram

651B

Configuration procedure

Configure Switch A:
# Create VLAN 10 and VLAN 20.

system-view

[SwitchA] vlan 10

[SwitchA-vlan10] quit

[SwitchA] vlan 20

[SwitchA-vlan20] quit

# Configure the IP addresses of VLAN-interface 10 and VLAN-interface 20.

[SwitchA] interface vlan-interface 10

[SwitchA-Vlan-interface10] ip address 1.1.2.1 24

[SwitchA-Vlan-interface10] quit

[SwitchA] interface vlan-interface 20

[SwitchA-Vlan-interface20] ip address 1.1.3.1 24

[SwitchA-Vlan-interface20] quit

# Configure ACL 3101 to match TCP packets.

[SwitchA] acl number 3101

[SwitchA-acl-adv-3101] rule permit tcp

[SwitchA-acl-adv-3101] quit

# Configure Node 5 for policy aaa to forward TCP packets to next hop 1.1.2.2.

[SwitchA] policy-based-route aaa permit node 5

[SwitchA-pbr-aaa-5] if-match acl 3101

[SwitchA-pbr-aaa-5] apply next-hop 1.1.2.2

[SwitchA-pbr-aaa-5] quit

# Configure interface PBR by applying policy aaa to VLAN-interface 11.

[SwitchA] interface vlan-interface 11

This manual is related to the following products: