Configuring bgp load balancing – H3C Technologies H3C S12500-X Series Switches User Manual
Page 318
304
Interface : Vlan10 Cost : 0
Static Routing table Status :
Summary Count : 0
The output shows that Switch A communicates Switch B through VLAN-interface 10. The link over
VLAN-interface 10 fails.
# Display IPv6 static routes on Switch A again.
Summary Count : 1
Static Routing table Status :
Summary Count : 1
Destination: 120::/64 Protocol : Static
NextHop : 10::100 Preference: 65
Interface : Vlan11 Cost : 0
Static Routing table Status :
Summary Count : 0
The output shows that Switch A communicates with Switch B through VLAN-interface 11.
This manual is related to the following products: