Configuring is-is route leaking – H3C Technologies H3C S12500-X Series Switches User Manual
Page 201
187
Tasks at a glance
Remarks
(Optional.)
1088H
Tuning and optimizing BGP networks
:
•
1089H
Configuring the keepalive interval and hold time
•
1090H
Configuring the interval for sending updates for the same route
•
1091H
Enabling BGP to establish an EBGP session over multiple hops
•
1092H
Enabling immediate reestablishment of direct EBGP connections upon link failure
•
1093H
Enabling 4-byte AS number suppression
•
1094H
Enabling MD5 authentication for BGP peers
•
1095H
Configuring BGP load balancing
•
1096H
Disabling BGP to establish a session to a peer or peer group
•
1097H
Configuring BGP soft-reset
•
1098H
Protecting an EBGP peer when memory usage reaches level 2 threshold
N/A
(Optional.)
1099H
Configuring a large-scale BGP network
:
•
1100H
Configuring BGP community
•
1101H
Configuring BGP route reflection
•
1102H
Ignoring the ORIGINATOR_ID attribute
•
1103H
Configuring a BGP confederation
N/A
(Optional.)
1104H
Configuring BGP GR
N/A
(Optional.)
1105H
Enabling SNMP notifications for BGP
N/A
(Optional.)
1106H
Enabling logging of session state changes
N/A
(Optional.)
1107H
Configuring BFD for BGP
N/A
To configure BGP, perform the following tasks (IPv6):
Tasks at a glance
Remarks
1108H
Configuring basic BGP
:
•
(Required.)
1109H
Enabling BGP
•
(Required.) Perform one of the following tasks:
{
1110H
Configuring a BGP peer
{
1111H
Configuring a BGP peer group
•
(Optional.)
1112H
Specifying the source interface for TCP connections
H3C recommends that
you configure BGP peer
groups on large scale
BGP networks for easy
configuration and
maintenance.
Perform at least one of the following tasks to generate BGP routes:
•
1113H
Injecting a local network
•
1114H
Redistributing IGP routes
N/A
(Optional.)
1115H
Controlling route distribution and reception
:
•
1116H
Configuring BGP route summarization
•
1117H
Advertising optimal routes in the IP routing table
•
1118H
Advertising a default route to a peer or peer group
•
1119H
Limiting routes received from a peer or peer group
•
1120H
Configuring BGP route filtering policies
•
1121H
Configuring BGP route dampening
N/A