Configuring bgp route summarization – H3C Technologies H3C S12500-X Series Switches User Manual
Page 280
266
Network NextHop MED LocPrf PrefVal Path/Ogn
* >i 9.1.1.0/24 10.1.1.1 0 100 0 (65001)
100i
[SwitchB] display bgp routing-table ipv4 9.1.1.0
BGP local router ID: 2.2.2.2
Local AS number: 65002
Paths: 1 available, 1 best
BGP routing table information of 9.1.1.0/24:
From : 10.1.1.1 (1.1.1.1)
Relay nexthop : 10.1.1.1
Original nexthop: 10.1.1.1
OutLabel : NULL
AS-path : (65001) 100
Origin : igp
Attribute value : MED 0, localpref 100, pref-val 0, pre 255
State : valid, external-confed, best,
# Display the BGP routing table on Switch D.
[SwitchD] display bgp routing-table ipv4
Total number of routes: 1
BGP local router ID is 4.4.4.4
Status codes: * - valid, > - best, d - damped, h - history,
s - suppressed, S - Stale, i - internal, e - external
Origin: i - IGP, e - EGP, ? - incomplete
Network NextHop MED LocPrf PrefVal Path/Ogn
* >i 9.1.1.0/24 10.1.3.1 0 100 0 100i
[SwitchD] display bgp routing-table ipv4 9.1.1.0
BGP local router ID: 4.4.4.4
Local AS number: 65001
Paths: 1 available, 1 best
BGP routing table information of 9.1.1.0/24:
From : 10.1.3.1 (1.1.1.1)
Relay nexthop : 10.1.3.1
Original nexthop: 10.1.3.1
OutLabel : NULL
AS-path : 100
Origin : igp
Attribute value : MED 0, localpref 100, pref-val 0, pre 255