Ospf frr configuration example – H3C Technologies H3C S12500-X Series Switches User Manual

Page 176

162

[SwitchC-isis-1] network-entity 10.0000.0000.0003.00

[SwitchC-isis-1] quit

[SwitchC] interface vlan-interface 200

[SwitchC-Vlan-interface200] isis enable 1

[SwitchC-Vlan-interface200] quit

[SwitchC] interface vlan-interface 100

[SwitchC-Vlan-interface100] isis enable 1

[SwitchC-Vlan-interface100] quit

[SwitchC] interface vlan-interface 300

[SwitchC-Vlan-interface300] isis enable 1

[SwitchC-Vlan-interface300] quit

# Configure Switch D.

system-view

[SwitchD] isis 1

[SwitchD-isis-1] is-level level-2

[SwitchD-isis-1] network-entity 20.0000.0000.0004.00

[SwitchD-isis-1] quit

[SwitchD] interface interface vlan-interface 300

[SwitchD-Vlan-interface300] isis enable 1

[SwitchD-Vlan-interface300] quit

# Display IS-IS routing information on each switch.

[SwitchA] display isis route

Route information for IS-IS(1)

------------------------------

Level-1 IPv4 Forwarding Table

-----------------------------

IPv4 Destination IntCost ExtCost ExitInterface NextHop Flags

-------------------------------------------------------------------------------

10.1.1.0/24 10 NULL VLAN100 Direct D/L/-

10.1.2.0/24 20 NULL VLAN100 10.1.1.1 R/-/-

192.168.0.0/24 20 NULL VLAN100 10.1.1.1 R/-/-

0.0.0.0/0 10 NULL VLAN100 10.1.1.1 R/-/-

Flags: D-Direct, R-Added to Rib, L-Advertised in LSPs, U-Up/Down Bit Set

[SwitchC] display isis route