Teac SX-1 Reference Manual - Manual (Page 88)

Part IV–Mixer Controls
88
TASCAM SX-1 Reference Manual
VGA Automation Screen
From the
MAIN DISPLAY MODE
section, press the
AUTOMATION
key to reach the Automation screens
(if the
MAIN DISPLAY
is set to
EXTERNAL
—other-
wise, use the Alt+5 combination on the PS/2 key-
board). These screens provide control of all the SX-
1’s automation parameters.
TIP
Working with data in the AUTOMATION screen is very sim-
ilar to working with audio or MIDI data in the TRACK
screen. Most of the same editing and selection com-
mands and tools apply to these regions as with audio
and MIDI data.