Teac SX-1 Reference Manual - Manual (Page 29)

Part II–Monitoring Signals and Selecting Screens
TASCAM SX-1 Reference Manual
29
LCD ACCESS Section
The controls in this section recall screens for the SX-
1’s LCD display. Many of these screens reflect the
tabs of the VGA screens (for example, the
Track
screen’s tabs).
DELAY/TRIM The
DELAY/ TRIM
key recalls the
Delay/Trim
screen, which houses individual channel
delay and level trim controls.
GROUPS/LINKS The
GROUPS/LINKS
key recalls
the
Groups/Links
screen, where fader groups and linked
parameters and channels are managed.
BUSS ASSIGNMENT The
BUSS ASSIGNMENT
key recalls the
Buss Assignment
screen, which handles
all buss routing for the console.
TIME/TEMPO The
TIME/ TEMPO
key recalls the
Time/Tempo
screen, where a project’s Tempo and met-
ronome settings may be modified.
WAVEFORM The
WAVEFORM
key recalls the
Waveform
screen, where a selected channel’s sample-
accurate waveforms can be viewed and edited on the
LCD.
MIDI TRACK The
MIDI TRACK
key recalls the
MIDI Track
screen which contains a Piano Roll display.
EVENT LISTS The
EVENT LISTS
key recalls the
Event Lists
screen where individual events may be
viewed and edited.
TRANSPORT The
TRANSPORT
key recalls the
Transport
screen where external devices are controlled,
locate points are managed , and parameters like
frame rate are set on the LCD.
LCD Screen
The onboard LCD provides access to all the neces-
sary operating screens. In situations where an exter-
nal VGA display is not available, the SX-1’s software components can be reached directly through
the LCD. The LCD can also work in tandem with the
VGA to provide a second display.