Teac SX-1 Reference Manual - Manual (Page 143)

Part VII–MIDI Sequencing
TASCAM SX-1 Reference Manual
143
Sensitivity
Sensitivity
defines the region where
notes will be moved to the grid. If
Sensitivity
is set to
100%, notes will be moved to the nearest grid line
regardless of where they originally play. If
Sensitivity
is less than 100%, only the notes within a certain dis-
tance of a grid line will be moved. For example, at
50%, only notes that are within 1/2 a grid interval
will be moved. At 0%, no notes will be moved.
The figure below shows the effect of 50% sensitivity.
Since only the first note falls in the shaded “sensitiv-
ity zone”, it is the only note that is actually quan-
tized.
Strength The
Strength
parameter determines how
much each note is moved towards the nearest grid
line. When set to 100%, the notes will be moved
exactly to the grid line. At 50%, the notes will only
be moved halfway towards the nearest grid line. This
is also a “humanization” feature that can be used to
make quantized music sound more natural.