Teac SX-1 Reference Manual - Manual (Page 14)

Part I–Manuals & Conventions
14
TASCAM SX-1 Reference Manual
Fader Banks
It’s important to remember that the SX-1’s faders
control more than just one group of levels. Besides
the first 16 mixer channels, at default the faders also
control: inputs 17-32, the cue mix, MIDI tracks,
sends, returns, and busses. Different groups of faders, called fader banks, are accessed by the keys in the
FADER BANKS
section on the SX-1’s slanted front
panel, and the cue mix bank is reached via the
CUE
key to the right of the virtual channel strip.
LCD Display
VGA or LCD
You have a choice of using the LCD or an VGA dis-
play as your main screen. The LCD display always
follows the selection keys in the
MAIN DISPLAY
MODES
section. To have an external VGA follow
these keys, press the
MAIN DISPLAY
key above the
LCD ACCESS
section (on the SX-1's slanted front
panel). The LED should light.
LCD Navigation
The LCD display is surrounded by several knobs and
buttons. The function of these controls change
according to the display on the LCD. We refer to
these controls as “soft” knobs and keys because their
functions are directly related to the SX-1's software. The soft knobs and soft keys line up with onscreen
knobs and keys to indicate their current function.
Each of the LCD’s screens has a different set of these
virtual controls. Some keys are single function while
others are of a pop-up menu style. Most of the soft