Teac SX-1 Reference Manual - Manual (Page 191)

Part VIII–Data Entry, System & File Management
TASCAM SX-1 Reference Manual
191
Option Card Settings
The SX-1 can have up to three Option cards installed
in its three expansion Slots. The
Option
s screens,
which are unique to the LCD, are where you manage
the settings for these cards.
Below is an example of how an
Option
screen appears
with an AES/EBU card fitted in slot 1. The screen
will change slightly, depending on the card you have
installed.
From the
MAIN DISPLAY MODE
section, press
SETTINGS/ PREFS
, and use the
NEXT PAGE
(or
PREV
PAGE
) soft key to scroll to the
Option
card screen that
you want.
NOTE
The options and capabilities differ, according to the
type of card fitted. Consult the TASCAM Web site
(http://www.tascam.com) for up-to-date details.
Front Panel SHUTDOWN Key
The
SHUTDOWN
key is located on
the SX-1’s slanted front panel, just
above the
LCD ACCESS
section. It
is important to properly shutdown
the SX-1 in order to maintain the
integrity of your hard drives and
their associated project files along with the SX-1’s
system. Use this key to execute a proper shutdown.
Press and hold the
SHUTDOWN
key for 3 seconds to
execute a proper shutdown. When the SX-1 is ready
to be powered off, a message will appear on the LCD
screen that reads,
It is now safe to turn the SX-1 off
.