Teac SX-1 Reference Manual - Manual (Page 203)

Part X–Specifications, etc.
TASCAM SX-1 Reference Manual
203
Audio specifications
I/O (analog)
MIC IN 1–16 XLR-3-31 a balanced
a. All XLR connectors are wired 1=ground, 2=hot, 3=cold
Input impedance 2.2k
Ω
Input level –55dBu ( TRIM maximum) — +1dBu (TRIM minimum)
Headroom 16dB
Phantom power +48V (switchable in groups of 4 channels)
LINE IN 1–16 TRS 1/4” b x 16, balanced
b. All balanced TRS 1/4” jacks are wired tip=hot, ring=cold, sleeve=ground
Input impedance 10k
Ω
Nominal input level +4dBu
Input level –41dBu ( TRIM maximum) — +15dBu (TRIM minimum)
Headroom 16dB
2 TR IN (L/R) RCA (phono) x 2, unbalanced Input impedance 10k
Ω
Nominal input level –10dBV
Headroom 16dB
STEREO OUTPUT (L/R) XLR-3-32 balanced Output impedance 100
Ω
Nominal output level +4dBu
Maximum output level +20dBu
STEREO OUTPUT (L/R) RCA (phono) x 2,
unbalanced Output impedance 200
Ω
Nominal output level –10dBV
Maximum output level +6dBV
AUX OUTPUT 1-4 TRS 1/4” x 4, balanced Output impedance 100
Ω
Nominal output level +4dBu
Maximum output level +20dBu
CR LARGE MONITOR output (L/R) TRS 1/4”
x 2, balanced Output impedance 200
Ω
Nominal output level +4dBu
Maximum output level +20dBu
CR SMALL MONITOR output (L/R) TRS 1/4”
x 2, balanced Output impedance 200
Ω
Nominal output level +4dBu
Maximum output level +20dBu
STUDIO MONITOR output (L/R) TRS 1/4” x 2,
balanced Output impedance 100
Ω
Nominal output level +4dBu
Maximum output level +20dBu
PHONES 1-2, 1/4” stereo x 2 Output power 55mW + 55mW
47
Ω
INSERT 1-16 TRS c x 16, unbalanced
c. Insert 1/4” jacks are wired: tip=send, ring=receive, sleev-ground
Output impedance 100
Ω
Nominal output level –2dBu
Input impedance 10k
Ω
Nominal input level –2dBu
Headroom 16dB