Teac SX-1 Reference Manual - Manual (Page 63)

Part IV–Mixer Controls
TASCAM SX-1 Reference Manual
63
ANALOG IN
The
ANALOG IN
screen is an example of how all the
ROUTING
screens appear. The controls found in these
screens directly parallel the controls of the VGA
Routing
tabs.
PREV PAGE Moves backward through the routing
screens.
NEXT PAGE Moves forward through the routing
screens.
Bussing
The mixer has a total of eight busses, not including
the Cue, monitor (Studio and Control Room outs),
and Master L/R busses.
VGA Controls
A channel can be assigned to the busses via the
VGA’s
Channel
screen, in the
CONTROL
module, and
directly on a channel in the
Mixer
screen.
Buss Assign Keys These are the buss assign keys
from the
CONTROL
module of the
Channel
screen. They
look very similar to the assign keys on the mixer
channels in the
Mixer
screen.