Teac SX-1 Reference Manual - Manual (Page 79)

Part IV–Mixer Controls
TASCAM SX-1 Reference Manual
79
VGA Input Overview Screen
All 32 of the mixer channel inputs are displayed in
this overview.
TIP
The meters of the SX-1’s VGA screens are able to display
three signal weights at once: Peak, Average, and Cur-
rent. The white dot to the right of the meter (when sig-
nal is present) is RMS (or Average), the peak LED that
holds for a few seconds is Peak, and the regular meter
shows current amplitude (Current).
Incidentally, the speed of meter operation is adjustable
from the LCD
Preferences page. You can vary the speed
between very fast and very slow (which looks a bit like
old plasma meters on large format consoles).