Teac SX-1 Reference Manual - Manual (Page 67)

Part IV–Mixer Controls
TASCAM SX-1 Reference Manual
67
VGA Aux Return Masters
Master levels for the Aux Returns are reached
through the Fader Banks. To see the return levels on
the VGA, make sure the
Mixer
screen is selected
(press
MIX
in the
MAIN DISPLAY MODE
. From the
FADER BANK
section, press
BANK MODE
so that
the LED is on. Then press
RTN/ GRP
to
reach this screen.
TIP
Keep in mind that it’s not necessary to have a Fader
screen up just to move an aux return level. If the Aux
return fader bank has been recalled to the surface, you
can just move the faders directly on the mixer while
leaving a different screen on the display.