Teac SX-1 Reference Manual - Manual (Page 167)

Part VIII–Data Entry, System & File Management
TASCAM SX-1 Reference Manual
167
LCD New Project Screen
This LCD screen reflects the New Project parameters
found on the
New Project
tab of the VGA
Project
screen.
Most of the parameters found on this screen are iden-
tical to the parameters found in the VGA
New Project
tab and are explained on the previous pages. Only
those parameters that are unique to this LCD screen
are explained here.
From the
MAIN DISPLAY MODE
section, press
PROJECT
, then press the
New
soft key.
Create Project After you have named your new
project and selected a sample rate, press this soft key
to write the new project file to disk.
Manage Project screens
The Manage Projects screens are where you load,
copy, and delete projects on your current disk vol-
ume.
VGA Manage Project Tab
From the
MAIN DISPLAY MODE
section, press
PROJECT
to reach the
PROJECT
screen. Then click on
the
Manage Projects
tab.
Name This field displays the name of the currently
selected project.
LOAD Loads the project selected in the list.
COPY This key copies the selected project into a
new file with a new name. The audio files are only
copied when copying the project to a different drive
or when backing up. See the section “The SX-1 and
Hard Drives” on page 175.
RENAME Lets you rename the selected project.
DELETE Deletes the project selected in the list.
CLEANUP Cleans up all currently-mounted disks
by going through the projects, and checking to see
what clips are referenced by the projects on the disks.
Any unreferenced clip files are deleted. If only part
of a clip is used, the whole clip will be kept on disk.
Files in the Import folder will not be cleaned up in
this way.