Comtech EF Data SNM-1001L - Manual (Page 97)

SNM-1001L Satellite Modem Revision 1
Front Panel Operation MN/SNM1001L.IOM
4–33
4.3.1.4 Function SELECT: CONFIGURATION: LOCAL AUPC
(Conditional)
CONFIGURATION
LOCAL AUPC
IMPORTANT
Conditional: This menu is displayed when Local Modem AUPC = ON
located under the Utility: Modem Type menu.
The menu is available in several modes:
Self-Monitoring AUPC with 1 Modem: In this mode ASYNC is not used. This does not require the
Overhead card or the Reed-Solomon cards.
Remote AUPC between 2 Modems:
The optional Reed-Solomon cards are installed and the Modem
Type is AUPC located under Utility: Modem Type menu.
Press to review or edit sub-menus that follow. The selections are On or Off.
FUNCTION SELECT: CONFIGURATION: LOCAL AUPC:
AUPC
ENABLE (CONDITIONAL)
AUPC ENABLE
OFF
IMPORTANT
Conditional: This menu is displayed when Local Modem AUPC = ON
located under the Utility: Modem Type menu.
Programs the AUPC On or Off.
Upon entry, the current status is displayed. Press [
↑] or [↓] to make the selection. Press
to execute the change.