Comtech EF Data SNM-1001L - Manual (Page 95)

SNM-1001L Satellite Modem Revision 1
Front Panel Operation MN/SNM1001L.IOM
4–31
FUNCTION SELECT: CONFIGURATION: INTERFACE:
BUFFER SIZE (CONDITIONAL)
IMPORTANT
Conditional: The Bits or Milliseconds menu is displayed depending
upon whether Bits or Milliseconds is selected under the Utility:
Interface Buffer Program menu.
BUFFER SIZE
384 BITS
BUFFER SIZE
6 MILLI SECONDS
Sets the size of the buffer in either Bits or Milliseconds..
Upon entry, the current buffer length is displayed. Press [
↑] or [↓] to select the desired buffer
size. The buffer size is displayed in seconds or bits. Enter the Utility Interface menu to change the
buffer units to seconds or bits.
• If selecting seconds, choose from 1 to 99 ms, in increments of 1 ms ≤ 2.6 Mbps or 0
(Bypass).
• If selecting bits, choose from 32 to 262144 bits, in increments of 16 bits.
• Press [ENTER] to execute the change.
Note: To have the modem calculate the plesiochronous shift, set the buffer units to ms. When a
specific buffer depth is desired, set the buffer units to bits. Select bits or ms from the Utility:
Interface menu.
FUNCTION SELECT: CONFIGURATION: INTERFACE:
BUFFER CENTER
BUFFER CENTER
YES/NO
This configuration function is used to center the buffer. Choosing YES centers the buffer.
Press twice to center the buffer.