Comtech EF Data SNM-1001L - Manual (Page 147)

SNM-1001L Satellite Modem Revision 1
Front Panel Operation MN/SNM1001L.IOM
4–83
FUNCTION SELECT: UTILITY: SYSTEM: FPGA FIRMWARE
FPGA FIRMWARE
FW/NNNNNN-DDR
Displays the FPGA module firmware version.
FPGA FIRMWARE
MM/DD/YYYY
Press to display includes the month, day, and year.
TURBO FIRMWARE
FW/NNNNR
Note: This menu is displayed only when the Turbo option is installed.
Displays the Turbo module firmware version.
FUNCTION SELECT: UTILITY: SYSTEM: DEMO MODE
DEMO MODE
OFF
Displays the status of the Demo Mode as either On or Off. Enables all the FAST options for the
hardware installed for 1 hour.
FUNCTION SELECT: UTILITY: SYSTEM: EXT AGC: MAX PWR
EXT AGC: MAX PWR
0.0 Volts
Sets the AGC voltage for a RX signal. The voltage range is 0.0 to 10.0V, in 0.5V steps.
Upon entry, the current external AGC voltage level is displayed. Press [
↑] or [↓] to increment or
decrement the AGC voltage level in 0.5V steps. Press to execute the change.