Comtech EF Data SNM-1001L - Manual (Page 119)

SNM-1001L Satellite Modem Revision 1
Front Panel Operation MN/SNM1001L.IOM
4–55
FUNCTION SELECT: REMOTE AUPC: CONFIGURATION:
AUPC ENABLE (CONDITIONAL)
AUPC ENABLE
OFF
IMPORTANT
Conditional: This menu is available the AUPC selection is made from
the Modem Type menu, located under the Utility: Modem Type menu.
Requires the Reed-Solomon Card with AUPC option.
Programs the AUPC feature On or Off at the far end of the link. This requires that modems at both
ends of the link are locked to function. This program is for control or last known status.
FUNCTION SELECT: REMOTE AUPC: CONFIGURATION:
B-BAND LOOP BACK (CONDITIONAL)
B-BAND LOOP BACK
OFF
IMPORTANT
Conditional: This menu is available when AUPC selection is made from
the Modem Type menu, located under the Utility: Modem Type menu.
Requires the Reed-Solomon Card with AUPC option.
Programs the remote baseband loopback On or Off at the far end of the link. Modems at both
ends of the link shall be locked.
Note: This program is for control or last known status.