Comtech EF Data SNM-1001L - Manual (Page 140)

SNM-1001L Satellite Modem Revision 1
Front Panel Operation MN/SNM1001L.IOM
4–76
FUNCTION SELECT: UTILITY: INTERFACE: RX DATA PHASE
RX DATA PHASE
NORMAL
RX data phase relationship. Use this option to select Normal or Invert for the RX data relationship to
the selected RX clock.
FUNCTION SELECT: UTILITY: INTERFACE: CTS DELAY
CTS DELAY
0 SECONDS
Sets the delay in seconds (0 to 60) for the Clear To Send (CTS) signal to become active after RTS is
applied.
4.3.6.5 FUNCTION SELECT: UTILITY: OUTDOOR UNIT (CONDITIONAL)
UTILITY
OUTDOOR UNIT
IMPORTANT
Conditional: This menu is available only when ODU Power Supply, FSK,
and TX-IF Output are On.