Comtech EF Data SNM-1001L - Manual (Page 130)

SNM-1001L Satellite Modem Revision 1
Front Panel Operation MN/SNM1001L.IOM
4–66
This command allows for enabling or disabling of the TX carrier output depending on the
described conditions. One application for command is the operation of demand network systems.
FUNCTION SELECT: UTILITY: MODULATOR: TX SYMBOL RATE
TX SYMBOL RATE
64.000 Ksps
Status only: 4.800 to 2500 ksps. Provides symbol rate corresponding to the data rate, code rate(s),
modulation and overhead (framing) programmed into the modulator.
4.3.6.3 FUNCTION SELECT: UTILITY: DEMODULATOR
UTILITY
DEMODULATOR
Select information to view using the [
←] [→] arrow keys, then press .