Comtech EF Data SNM-1001L - Manual (Page 139)

SNM-1001L Satellite Modem Revision 1
Front Panel Operation MN/SNM1001L.IOM
4–75
FUNCTION SELECT: UTILITY: INTERFACE: BUFFER PROGRAM
BUFFER PROGRAM
BITS
Allows selection of either Bits or Milliseconds for the receive buffer.
• For the modem to calculate buffer size, select Milliseconds.
• For a specific buffer depth, select Bits.
IMPORTANT
This menu indicates whether the Bits or Milliseconds menu is
displayed under Configuration: Interface Buffer Size.
FUNCTION SELECT:UTILITY: INTERFACE: RTS TX-IF CNTRL
RTS TX-IF CNTRL
OFF
Programs the modem to allow a Request To Send (RTS) signal to enable or disable the output carrier
when data is ready for transmission.
FUNCTION SELECT: UTILITY: INTERFACE: TX DATA PHASE
TX DATA PHASE
NORMAL
TX data phase relationship. Use this option to select Normal or Invert for the TX data relationship to
the selected TX clock.