Comtech EF Data SNM-1001L - Manual (Page 79)

SNM-1001L Satellite Modem Revision 1
Front Panel Operation MN/SNM1001L.IOM
4–15
FUNCTION SELECT: CONFIGURATION: MODULATOR:
ODU OUTPUT DELAY
ODU OUTPUT DELAY
00.00 MIN SEC
Programs the ODU Output delay with 0.0 to 20.00 minutes. At power up, the M&C delays carrier
turn On by the programmed time. During output delay timeout, the front panel carrier On LED
flashes and the ODU output delay screen shows the remaining delay time.
Normally, when using this feature, the ODU 10MHz reference is On and the ODU Power Supply is
On. This allows the ODU or BUC time to warm-up before the carrier is transmitted. Upon entry, the
current status of the ODU Output Delay is displayed. Press [
↑] or [↓] to make the selection. Press
to execute the change.
FUNCTION SELECT: CONFIGURATION: MODULATOR:
ODU 10 MHz REF
ODU 10 MHz REF
OFF
Programs the ODU 10 MHz REF On or Off. The reference is transmitted up the center conductor
of the TX-IF connector.
Upon entry, the current status of the ODU 10 MHz REF is displayed. Press [
↑] or [↓] to make the
selection. Press to execute the change.