Comtech EF Data HPCST-5000 - Manual (Page 57)

High-Power C-Band Satellite Terminal Single Thread System Installation
Rev. 0 3–3
3.1 Unpacking
The HPCST-5000 terminal system is packaged in multiple, preformed, reusable foam
inside a cardboard carton.
Before unpacking the carton components, ensure that there is plenty of room around the
carton for workspace. A large work table is recommended.
To remove the parts:
1. Cut the tape at the top of the carton where it is indicated OPEN THIS END.
2. Lift out the cardboard/foam spacer covering the unit.
3. Remove each part from the carton.
CAUTION
Because the RFT and C-Band SSPA are heavy, assistance may be
necessary to remove the unit from the box.
Note: Save the packing material for reshipment.