Comtech EF Data HPCST-5000 - Manual (Page 31)

High Power C-Band Satellite Terminal Introduction
Rev. 0 1–15
1.7 HPCST-5000 Specifications
1.7.1 Prime Power Specification
Refer to Table 1-5 for prime power specifications.
Table 1-5. Prime Power Specifications
Assembly Ref Des Option Prime Power/Power Consumption
RFT-500 J5 AC 90 to 265 VAC, 47 to 63 Hz, 90W
SSPA-500:
75W
100W
125W
150W J5
J5
J5
J5 AC
AC
AC
AC
Prime Power/Power Consumption
90 to 265 VAC, 47 to 63 Hz, 500W
90 to 265 VAC, 47 to 63 Hz, 700W
90 to 265 VAC, 47 to 63 Hz, 800W
90 to 265 VAC, 47 to 63 Hz, 1000W
LNA DC 10.8
# 0.2 VDC (as provided from RSU)
RSU-503L J4, J8 DC 10.8 VDC (from either RFT-500)
1.7.2 System Interfaces
Refer to Table 1-6 for system interfaces on units.
Table 1-6. System Interfaces on Units
Description Type
RFT-500:
TX IF Input (J1)
RX IF Output (J3)
RX RF Input (J4, C-Band)
TX RF Output (J2, C-Band)
M&C Control (J6) TNC female, 50
$, VSWR 1.5:1 maximum
TNC female, 50
$, VSWR 1.5:1 maximum
N, female, VSWR 1.5:1 maximum
N, female, VSWR 1.5:1 maximum
Circular, PT06E-16-26S
SSPA-500:
RF TX Output (W/G)
RF TX Input (J1, C-Band)
RF TX Monitor (J4, C-Band)
M&C Control (J3) CPR-137G, VSWR: 1.25:1 maximum
N, female, VSWR 1.25:1 maximum
N, female, VSWR 1.3:1, typical 40 dB coupler
Circular, PT06E-16-26S
LNA:
RF RX Input (W/G)
RF RX Output (2X)
1:1 Switch Control CPR-229G, VSWR: 1.25:1 maximum
N, VSWR 1.5:1 maximum., female
Circular, PT06E-14-19P