Comtech EF Data HPCST-5000 - Manual (Page 123)

High-Power C-Band Satellite Terminal Operation
Rev. 0 5–11
5.4.3 Faults
Refer to Figure 5-5.
The FAULTS menu is accessible from the SELECT menu. Faults are similar to monitor
functions, as they display the current fault status of the group being displayed.
Press [ " ] or [ # ] to move between the faults.
The current fault status is displayed as “OK” or “FLT” for each parameter monitored.
“OK” indicates that no fault exists, while “FLT” indicates that a fault exists.
Press [CLEAR] to exit this level of operation and return to the previous level.
The following list outlines the faults monitored in the FAULTS menu. Refer to
Chapter 7 for troubleshooting procedures for each displayed fault.