Comtech EF Data CRS-500 - Manual (Page 96)

CRS-500 1:N Redundancy System Revision 2
Cables and Connections MN-CRS500
4–40
o
Connect the “Rx# | TO TRAFFIC MODEM” connector (note that ‘#’ designates a TM
number from 1 to 10) on the CRS-282Rxx ISU to the pertinent “Rx IF” connector on
the modem.
Figure 4-15. CRS-500 1:N IF Cabling Example 4 – CRS-282xx  CDM-625
(Connections shown for TMs 3 and 8 only)