Comtech EF Data CRS-500 - Manual (Page 157)

CRS-500 1:N Redundancy System Revision 2
Ethernet-Based Remote Product Management MN-CRS500
8–19
• Unit Date (dd/mm/yy) – Enter a date using the European convention in the form
dd/mm/yy (where dd = day [01 to 31], mm = month [01 to 12], and yy = year [00 to 99]).
Click [Submit] as needed to save these changes.
NTP Configuration
• Primary/Secondary NTP Server – Enter the IP address of the primary and secondary NTP
(Network Time Protocol) server.
The secondary NTP server feature may be disabled by entering an invalid IP
address such as 0.0.0.0.
• NTP Enable/Disable – Select Enabled or Disabled from the drop-down list to enable or
disable the NTP feature.
Click [Submit] as needed to save these changes.
Bulk Information (read-only)
Bootrom – The selected Current Active Firmware Image is identified here by its Description (i.e.,
its part number, e.g. FW-0000322); its Version (e.g., 1.2.4); and its (release) Time and Date (e.g.,
17:18:35 8/8/13).
Bulk 1 / Bulk 2 – The Bulk Firmware is identified as it is loaded into the Bulk #1 and Bulk #2
image slots, in the same format as the active Bootrom listing.