Comtech EF Data CRS-500 - Manual (Page 158)

CRS-500 1:N Redundancy System Revision 2
Ethernet-Based Remote Product Management MN-CRS500
8–20
8.5.3.4.2 Utility | Boot Slot
Chapter 5. UPDATING FIRMWARE
Use this page to select which current, active firmware image is to be loaded for operation upon
initial power-up or soft reboot.
Figure 8-8. Utility | Boot Slot Page
Firmware Image Select
• Boot From – Use the drop-down list to select Latest, Image 1, or Image 2. In this example,
Image 1 is selected as the active loaded Bootrom.
Selecting Latest directs the unit to load the image that contains the most current firmware
automatically.
Click[Apply] when done.
Click [Reboot Now] to perform a soft reboot of the CRS-500 using the selected active (current)
firmware Image.