Comtech EF Data CRS-500 - Manual (Page 132)

CRS-500 1:N Redundancy System Revision 2
CSU Front Panel Operation MN-CRS500
7–16
INFO: S/N Name Setup
MAC Remote Mask IF-Sw
Use the ◄ ► arrow keys to select S/N, Name, Setup, MAC, Remote, Mask, or IF-Sw, and then
press ENTER.
7.2.2.2.1 Info: S/N
Serial Number:
-------------------------
This screen displays the unique serial number assigned to this unit by Comtech EF Data.
7.2.2.2.2 Info: Name
Unit Name:
-------------------------
This screen displays the user-defined switch name that is created via the UTILITY: Name
submenu.
7.2.2.2.3 Info: Setup
TM: 1 2 3 4 5 - 7 - 9 10
AUTO Bkup:05 Rest:20
This screen displays some of the settings configured in the CONFIG: OPTIONS menu. Active
Traffic Modems (TM) are displayed on the top line; the AUTO mode and the Backup (Bkup) and
Restore (Rest) Holdoff times (in seconds) are displayed on the bottom line.
7.2.2.2.4 Info: MAC (Ethernet MAC Address)
Ethernet MAC Address:
############
This screen displays the unit’s Ethernet MAC Address.
7.2.2.2.5 Info: Remote (Remote Control Info)
Rem Cntl:Ser+Eth 485-2W
Addr:1000 19200 Baud
This screen displays if the unit is in LOCAL or REMOTE mode, and gives details of the electrical
interface type, the unit address, and the baud rate.
7.2.2.2.6 Info: Mask (Alarm Mask Info)